Action Machinery, Inc.
(502)-459-1313  Fax (502)473-1953
Ficep Tandem Drill Saw

The drill/saw tandem system has many advantages such as:

  • Requires less than half the space of a conventional split system
  • Smaller capital investment
  • Single operator
  • The drill operator no longer waits for the saw operator or vice versa
  • Multi tasking software permits the sawing of one section while drilling of a different size section simultaneously.
  • Positioning of the saw after the drill eliminates the minimum length finished part that can be off loaded on the exit side of the system.
  • One common CNC control and software controls all of the functions of the saw and the drill automatically. It is not necessary to manually start the sawing process once the section is in position.

 

CNC Controlled Band Saw

  • The position of the blade relative to the section being processed is automatically controlled by the software. This determines the start position, when to slow down for the web and the end of the cut
  • When a new blade is installed, the system automatically conditions the blade to achieve the optimum blade life.
  • All adjustment of the clamp positions and the blade guide position is established automatically through the software even on miter cuts.
  • When the blade should require replacement the operator is prompted.
  • Automatic sensing of blade pinching eliminates pinching forces.
  • Automatic separation of the cut part from the stock length prior to the blade withdraws to enhance blade life.
  • Local serviceability of the PC based control
  • Low maintenance cost due to the utilization of a standard PC platform
  • The Ficep software eliminates the requirement for additional hardware such as third party axis control boards, PLC hardware and encoder switching boards
  • The Ficep PC based control is provided with the proprietary Ficep software for remote diagnostics through a phone or internet connection.

Specifications:

CNC Drill/Saw Lines Models DXB & DZB

453 DXB

603 DXB

601 DZB

603 DZB

803 DXB

Number of spindles

3

3

1

3

3

Horsepower per spindle

7-1/2 HP

7-1/2 HP

12 HP

12 HP

7-1/2 HP

Spindle speed range RPM

180 - 800
RPM

180 - 800
RPM

180 - 2,500
RPM

180 - 1,000
RPM

180 - 1,000
RPM

Scribing on four sides

Yes

Yes

Yes

Yes

Yes

Maximum hole size

1-1/4"

1-1/4"

2"

1-9/16"

1-1/4"

Maximum section depth

17-3/4"

24"

24"

24"

31-1/2"

Number of drill heads

3

3

1

3

3

Diameters per head

1

1

6 or 12

6

1

CNC Drill Lines Models DZB & DJB

1001 DZB

1003 DZB

1201 DZB

1202 DZB

1203 DJB

Number of spindles

1

3

1

2

3

Horsepower per spindle

15 HP

12 HP

15 HP

15 HP

24 HP

Spindle speed range RPM

180 - 2,500
RPM

180 - 1,000
RPM

180 - 2,500
RPM

180 - 2,500
RPM

180 - 3,000
RPM

Four side scribing

Yes

Yes

Yes

Yes

Yes

Maximum hole size

2"

1-9/16"

2"

2"

2"

Maximum section depth

39-3/8"

39-3/8"

48"

48"

48"

Number of drill heads

1

3

1

2

3

Diameters per head with tool changer

6 or 12

6

6 or 12

6

6

 

 

 

 

Content copyright . Action Machinery. All rights reserved.
Web Hosting Companies